11 replies
by alanthetech
ONE PERFORM THIS ON A HARD DRIVE THAT YOU WANT COMPLETELY ERASED!!!!
If you want to format your D:, type in the following at a command prompt, "FORMAT D:", and then confirm that you want to format that drive.
by bevcraig
by dmiles
Using FDISK
1)Insert boot disk in drive a:,with CD in cd-rom drive
2)When the start-up screens appears,hit SHFT+F4
3)At the command prompt type FDISK
4)view your hard disk info (4)
5)Delete the primary partition- (3)hit escape
Create primary partition
After that you want to reboot the machine and after the machine comes back up you want to type in FORMAT C: or the letter of your drive,reboot the system after this and then load the OS.
hope this helps
by bevcraig
by tbradley
above answers are both correct, but If like me, you're lazy, and don't want to wait forever, add the following switch /q for quick, and /s if you want to make the drive bootable
format X: /q /s ( where X is your drive letter you want to format )
by bevcraig
by bv2
by bevcraig
by tuqan
by bevcraig
by bevcraig
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending