Discussion Locked

reformatting and reinstalling

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I know this is a desperate step, but it is one that has been highly recommended. I am a neophyte about any of this. The whole thing sounds a little overwhelming. If any one could possibly walk me through this forest, I will paid big points.

Thank You
Wilbur huck

4 replies

by thechas

Some steps will vary a little bit depending on the version of Windows that you have.

1. Back up all personal and critical files.
Print out the setup page from your Internet provider, and write down your personal settings.

2. Create a hardwareinventory.
If this is a name brand system, you should be able to get all the information you need from the mfg.
Otherwise, use Belarc Advisor www.belarc.com
or Sandra Lite www.sisoftware.com

3. Download the latest device drivers for all hardware.
Motherboard
Video card
Printer
Sound card
etc.

4. Extract the files from the archives (Most will be ZIP files)
Copy the extracted files to floppy disks, or a CD.
If a CD, make a seperate folder for each device.

5. Gather all the CDs you need.
Make sure that you have the software license keys.

6. If needed, create a startup floppy disk.
For W95, you will need to download the files from www.bootdisk.com
For W98, you can create one from the add/remove programs menu (Control Panel)
For W2K, you can create floppies from the CD, or boot from the CD.

7. Double check that you have all needed files backed up.

8. Boot from the startup disk.
If you want to completely clean your PC, and run fdisk at the DOS prompt.
For more details on fdisk, check out www.fdisk.com/fdisk
Also, look over the partitioning article at www.aumha.org

At a minimum, run the command
format c: /u/s
This will do all that you need to clean off your system unless you had a boot sector virus infection.

9. Insert the Windows CD, and run setup.
Follow the prompts.

continued

by thechas

10. Install device drivers in the following order:
Motherboard / chipset
DirectX (from Microsoft)
Video card
modem
sound card
other devices

11. Boot into safe mode.
Run scandisk and defrag to clean up your drive from the install files.

12. Go on-line, and install Windows updates as desired.
I recommend all critical and security updates.
The version of IE and other updates are up to you.

13. Install ONLY the software that you plan to use.

14. Boot into safe mode again, and run scandisk and defrag again.

Enjoy!?

Chas

by sbhuck

I printed this off, and some day I might get brave enough to try it. Here are the points Thanks

This discussion is closed to new replies.