Question Locked
0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have a windows 2000 server with a raid setup. i am replacing the 5 18 gig drives with 5 72 gig drives. i have a unitrends disk backup server that will reinstall the server in no time but how do i increase the volume sizes. i have heard that i can use partition magic once the server has been reinstalled and i have also heard that you cannot use partition magic on a windows 2000 server.
2 replies
by greenc Accepted solution
Clarifications
by power zhu Accepted solution
yes, partiton magic cannot help you solve the problem.
In fact, you need not to reinstall the server. if you want to transfer to the larger disk, just copy the original raid virtual disk, after copy, you can use the new disk immediately. But if you have reinstalled and want to expand the partition, see http://www.partition-tool.com/resource/partition-raid-windows-server.htm
This SW also can help you copy raid disk to transfer os and data, see http://www.partition-tool.com/easeus-partition-manager/disk-copy.htm
Hope it help.
This discussion is closed to new replies.
Trending Networks posts
Sort by Trending
Question Locked
Internet connection perfect on PC, not connecting anywhere else
0 helpful
4 replies
Question Locked
Using multi-NIC setup for NAS + router — better than VLAN?
0 helpful
4 replies
0 helpful
5 replies
Question Locked
Unknown device connected to my network
0 helpful
2 replies
Question Locked
How to change public IP without ISP?
0 helpful
2 replies