General discussion

Locked

Replacing a failed mirror

By reggieadm ·
I have a windows 2003 server that is using a mirror. Disk 0 needs to be replaced, it has a status of unhealthy while disk 1 is perfectly fine.

Does anyone have the procedures to replace and rebuild the mirror for disk 0?

Disk 1 should be very easy to replace in comparison.

REH

This conversation is currently closed to new comments.

7 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by Kuryous1 In reply to Replacing a failed mirror

Is this a hardware mirror or software? If Software...try:
http://technet2.microsoft.com/WindowsServer/en/Library/72c7fdee-97d5-4476-bc5e-a859d8b49a931033.mspx?mfr=true

Collapse -

by Kuryous1 In reply to Replacing a failed mirror

Is this a hardware mirror or software? If Software...try:
http://technet2.microsoft.com/WindowsServer/en/Library/72c7fdee-97d5-4476-bc5e-a859d8b49a931033.mspx?mfr=true

Collapse -

by reggieadm In reply to

Poster rated this answer.

Collapse -

by sgt_shultz In reply to Replacing a failed mirror

...and yet another mskb link:
Steps to Recover a Failed Mirrored System/Boot Partition
http://support.microsoft.com/kb/120227/

Collapse -

by reggieadm In reply to

Poster rated this answer.

Collapse -

by reggieadm In reply to Replacing a failed mirror

The boot partition is what I was having a problem with. Thanks for the help.

Collapse -

by reggieadm In reply to Replacing a failed mirror

This question was closed by the author

Back to Networks Forum
7 total posts (Page 1 of 1)  

Related Discussions

Related Forums