Question

Locked

Router groups

By TWonk ·
Basically, any device attached / interfaced to a port of a router, ie, hubs, routers, PC?s, and PC?s connected to those hubs and routers, are considered in a separate group and need to have a unique IP address?right? And that the NICs and their associated TCP/IP IP address groups have to have a IP address with the 3rd octet being unique of the other group, ie, the LAN group=192.168.1.5,6,7,8 and the WAN (internet) group=192.168.2.5,6,7,8? Is this correct?

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Go here..

http://www.google.com/search?hl=en&q=Router%20groups

When on this page click on the link named "Virtual Router Redundancy Protocol", this will give you some idea of how you can setup attached computers/servers. Hope this info is of some help.

Please post back if you have any more problems or questions.

Collapse -

IP Addressing

by Nimmo In reply to Router groups

Take a look at this in regards to IP addressing.

http://www.cisco.com/warp/public/701/3.html

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums