Question Locked

SATA hard drives dont have drive letters

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

so i reinstalled my windows xp professional and my sata hard drives were plugged in
they show under my bios settings and under computer managment but it wont let me put driver letters to them
they are full of my backup stuff and just things i dont want to get rid of
i can make drive letters for them but i have to format it
is there another way of making driver letters for them without having to format the drives?
because the data loss would be a huge problem for me
Oleg

6 replies

by oh smeg

In the Drive Management Window? If you can you have a issue with the HDD's but if you can not see them there you most likely do not have the SATA driver/s installed.

If it's the latter the drives will be invisible to the computer and by just adding the SATA Driver you will cure the problem though you may be required to reboot the computer to get the drives accepted by the system.

If you list the Make Model of your Computer or M'Board some others here can most likely provide a direct link to the Web Site where you can get the necessary drivers from.

Col

by vsharma

hi

i am vijay

first of all tell me that can u see the drive in the computer manegment or not if yes the go to the second drive in the comp management which u have attached .

then go to the second drive partition and right click on that partition and select change drive letter and then select the drive letter which is avvailable in the list

after that repeat the same step for each partition for the second HDD

by willg

I recently connected a USB DVD writer to my XP Pro system, non raid, all SATA disks.
The Roxio software I had I found out later was buggy. It didn't install properly, I removed it but after restart all my drive letters in Explorer had been reassigned, except for C:\ OS partition.
I then noticed when I went into disk manager to change drive letters that none of the drive letters show up.
Somehow this also cleared my system restore points.
I used Paragon Partition Manager to change the drive letters to the correct drives but non of the drive letters still show up in Disk Manager.
Everything is working OK - as far as I can tell.

If you resolve your issue I'd like to know how to "repair" the no drive letters issue in disk manager. Everything looks OK in Explorer. I am not using dynamic disks.

I'll follow up if I come up with anything

WillG

by sue t

if the hard drive your os is on is formatted at fat you will not be able to read what is on the other drives if they are formatted ntfs. if this is the case you will need to change the fat to ntfs which you can do without losing your os or anything else on the drive.

by willg

The reason I posted was because I've already researched MS KB and other Internet forums a bit. Haven't spent additional time on my issue because - I'm productive and can't deal w the disruption right now. In my case all drives are basic, ntfs. never have been dynamic, RAID capable board but never used it on this workstation. 4 320 GB SATA drives and 1 CDROM - CDROM and primary partition were never affected, just the other other data and program drives.

I beleive my "mistake" 0 if you want to call it that was assigning drive letters out of order. I had a V: for virtual machines, S: and a T: and G: 2 of the drives were divided into partitions and 2 were not. When the external device was introduced it was automatically assigned H: I believe believe if I had assigned C,D,E,F,G,H... for partitions in order of disks the problem would not have occured. BTW my CDROM is z:

Thanks for the post any way.
A bit more info...when drive letters were altered, drive space changed, path of pagefile changed and recreateing page files also has not helped. Maybe MFT?
Also remember in "Windows" everything is visible and works and drive letters show up.
Only place they don't show up is in Disk Manager. I also tried creating a new DMgr snap-in.

This discussion is closed to new replies.