General discussion

Locked

Screen Resolution Reversal Problem

By hartwith ·
I have just installed an ATI Radeon 7500 pci graphics card into a Win98SE system. The resolution is set at 480 x 640 rather than 640 x 480 and therefore the screen image is narrow on the horizontal. I have used this make of card on other systems andthis problem has never occurred before. How can I reverse this to cure the problem?

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Screen Resolution Reversal Problem

by Deadly Ernest In reply to Screen Resolution Reversa ...

resolution problems are often due to either a driver problem, thus getting the latest Win98 driver from the manufaturer and loading it would fix it. Or it may be one of those rare cards that have resolution jumper settings on the card, this is then fixed by opening the box and resetting the jumpers as per the manual. Check the manual on it before doing anything.

Collapse -

Screen Resolution Reversal Problem

by hartwith In reply to Screen Resolution Reversa ...

I fitted an identical card into another Win98SE system only a few days previously and that set up with 640x480 as expected. No evidenec of any jumper settings that would cause this problem.

Collapse -

by hartwith In reply to Screen Resolution Reversa ...

This question was closed by the author

Back to Hardware Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums