Discussion Locked

scsi component

0 helpful
9 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

What is main differance between SCSI and IDE,?

Can you tell me the various CAT-type of Cable avialabli in network?

my mail id is rndhelpdesk@orchidpharma.com

Kindly answer to me thru mail.

9 replies

by parvus1202

SCSI..The Small Computer System Interface (SCSI) is a parallel I/0 bus and protocol that permits the connection of a variety of peripherals including disk drives, tape drives, modems, printers, scanners, optical devices, test equipment, and medical devices to a host computer.The SCSI bus connects all parts of a computer system so that they can communicate with each other. The bus frees the host processor from the responsibility of I/O internal tasks. The SCSI protocol is a peer-to-peer relationship: one device does not have to be subordinated to another device in order to perform I/0 activities. A total of eight devices can be connected to the bus simultaneously. Only two of these devices can communicate on the bus at any given time. SCSI interfaces provide for faster data transmission rates (up to 80 megabytes per second) than standard serial and parallel ports.
IDE...Abbreviation of either Intelligent Drive Electronics or Integrated Drive Electronics, depending on who you ask. An IDE interface is an interface for mass storage devices, in which the controller is integrated into the disk or CD-ROM drive. Although it really refers to a general technology, most people use the term to refer the ATA specification, which uses this technology.

by parvus1202

For CAt type cable..
Category

Maximum Data Rate

Usual Application

CAT 1

Less than 1 Mbps

Analog voice (POTS)
Integrated Services Digital Network Basic Rate Interface in ISDN
Doorbell wiring

CAT 2

4 Mbps

Mainly used in the IBM Cabling System for token ring networks

CAT 3

16 Mbps

Voice and data on 10BASE-T Ethernet

CAT 4

20 Mbps

Used in 16 Mbps Token Ring
Otherwise not used much

CAT 5

100 Mbps
1000 Mbps (4 pair)

100 Mbps TPDDI (100BASE-T or Fast Ethernet)
155 Mbps ATM
Gigabit Ethernet

CAT 5E

100 Mbps

100 Mbps TPDDI (100BASE-T or Fast Ethernet)
155 Mbps ATM

CAT 6

200-250 MHz

Super-fast Broadband Applications. Click here for a Tutorial on CAT 6 cables, by Lucent Technology

by cg it

you should give parvus a couple of 1,000 points for his answer. Very concise,complete answer.

This discussion is closed to new replies.