Discussion Locked

SCSI drive question

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a server with three Western Digital 18.3 GB HD as Raid 5.
I need to add some more disk space but the hard drive were listed as legacy equipment on WD web site. Do I need to match the Hard drives exactly? I mean can I put in Two more hard drives that are not exactly the same but were SCSI and were the same RPM of the first three.
and am I correct that when I add hard drives that all I need to do is plug them in and use disk manager to reconize them?

3 replies

by timwalsh

Usually, drives from different manufacturers will work together. The common wisdom of using the same model drives in a RAID array is primarily driven by the intent to prevent any type of incompatibilities. However, if your existing drives are no longer available, you don't have much of a choice. I would at least buy drives from the same manufacturer, to lessen the chance of potential incompatibilities.

Any drives you add MUST be at least the same size or larger. A smaller drive (regardless of the degree of disparity) cannot be successfully added to an existing array.

RPM isn't as much of a factor, although mismatches could effect I/O speed. The same can be said for SCSI version mismatches.

Remember that nothing is guarenteed here. You might check the documentation for your RAID controller and talk with the controller manufacturer's Tech support to be on the safe side.

This discussion is closed to new replies.