Seagate Hdd board

By channelplus ·
i have to change my logic board on my hard, does anybody know on the Seagate 250gb sata which data should be match? there is several data as on it as:
MODEL: ST3250823AS
P/N: 9Y7383-301
DATE CODE: 06214
i found many PCB board but most of them just model and firmware are same ,or some just the 6 first digits of the P/N.
i will be appricated for this help.

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Answers

Collapse -

On modern drives you typically cannot change PCBs

by robo_dev In reply to Seagate Hdd board

The mechanical portion of the drive is married to a PCB during the manufacturing process, and the eeprom on the PCB has data specific to the physical characteristics of the drive.


In the 'old days' I have swapped PCBs and it worked. I tried this on a newer vintage Seagate 20gig drive and the result was the most horrible grunting/squeaking sounds you ever heard come from a drive. The drive was OK, but the voice-coil driver chip on the PCB had been shorted out.

Related Discussions

Related Forums