Networks

Ask something
Question Locked

Setting up putty for cisco gear

0 helpful
4 replies

by fishingforbasses

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I've been using hyperterm private, my key is about to expire, and i cannot get putty to work.

What settings need to be changed to make it work with cisco gear.

I thought it would work without any configuration?

I set Stop Bits, parity etc correctly, but I am defidently missing something.........

thanks

4 replies

by zipona

Can you give the Putty settings for your Cisco device.

by pmetzger

Are you trying to use putty for console access or telnet/SSH?

Telnet or SSH should just work out of the box so to speak. For console access I have never tried to make it work like that, however I will attempt it and see if I come up with a workable solution. It should just be standard Com Port, 9600 N81 no flow.

This discussion is closed to new replies.