Question Locked

Setup won't allow me to change the hard-drive password

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have 2 Dell Latitude D600's. I can go into setup and change or wipe out the hard-drive password without a problem on one of the pc's. When I go into setup of the second pc, I try to arrow down to the hard-drive password, but it skips over the password field and doesn't allow me to change it. Why would these two systems behave differently and how do I fix this?

6 replies

by oh smeg

But without knowing a lot more it's impossible to say anything more.

Like what OS is in use on these computers and are the both part of the Same Domain with the Same user Privileges on both?

Are you logged into both computers as the Admin?

Col

by mary_prenaveau

I'm not sure I follow why the OS, users, and privileges would have anything to do with it. The hard drive password is required long before you even boot into the OS. The hard-drive password is required after going through the BIOS and before the OS is launched. Both PC's are running Windows 2000 Professional - same exact users and logins on both.

by ugadata

It is possible the problematic laptop has a setup password set. This one won't challenge you every time you boot the PC, only when you try to make BIOS changes.

by mary_prenaveau

The only other passwords available for setup in the BIOS are Primary and Admin and neither of those are set.

You got me thinking and I was able to figure out what I did. I had been bypassing the hard-drive password and going directly to the BIOS setup, and that's why the actual password field for the hard-drive is unavailable. Once I stopped doing that, the field was available again and I was able to change the password.

Thanks for your help!

by older mycroft

How exactly did you bypass a hard drive password by going direct to the BIOS?

You already said that the hard drive password came AFTER the BIOS and before the OS boot.

How were you able to do that when [i]'both machines are identical'[/i]??

Please do enlighten me. ;)

This discussion is closed to new replies.