General discussion

Locked

Shared printer errors, Win98 p2p

By sbest67 ·
We have a small network where I work; 7 Win98se boxes and 3 printers. The printers are all shared, and up until about 2 months ago all was flawless. We switched out a printer, and after un-installing the old and installing the new, every 2nd or 3rd document generates a spooler error. We have re-installed the drivers and each printer works flawlessly from the local machine. Is there something that I am bone-heading with my spool settings? All machines are set to start printing after first page is spooled, using RAW for 1 printer and EMF for the other.
Any ideas would be greatly appreciated.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by Chris910 In reply to Shared printer errors, Wi ...

I ran into similar problems when I had 1 machine printing with a PCL5 driver and another printing with a postscript driver. I solved this problem by matching the drivers on all of the machines using this printer.

Collapse -

by sbest67 In reply to

Poster rated this answer.

Collapse -

by sbest67 In reply to Shared printer errors, Wi ...

I have effected a partial work-around by capturing the printer port on the client machines and directing them to a parallel port. Any reason that might have helped?

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums