First off , when I use the word “work or worked” Im reffering to being able to get out on the internet.
Recently I was able to make an Embarq DSL modem work with a cisco router behind it. The modem however was NOT in bridge mode.
Now I want to make this work with the Modem in “bridge” mode. I have the Modem currently in bridge mode but I am unsure of the simplest way to setup NAT. Could someone look at this and reccomened a simple NAT config:
MODEM – Bridge Mode
WAN – fa0/0 67.234.34.76/18
LAN – fa0/1 192.168.1.1 255.255.255.0
LAN – 192.168.1.10 – 192.168.1.254
DHCP gives IPs to clients on LAN
