Question

Locked

Site to Site VPN netgear FVS114 ProSafe VPN Firewall

By rovlive ·
Hi ,

I am trying to setup site to site VPN using two FVS114 netgear VPN firewall

site A

billion modem (suspect this might be blocking it) ---netgear FVS114 VPN ---server etc


Site B

Netgear dsl modem --netgear FVS114 VPN --- pc

I ran the VPN vizard and status saying Phase 1 waiting PHASE 2 Idle.

site B logs shows

site B logs

[2008-12-02 23:15:20][==== IKE PHASE 1(from x.x.x.x) START (responder) ====]
[2008-12-02 23:15:20]**** RECEIVED FIRST MESSAGE OF AGGR MODE ****
[2008-12-02 23:15:20]<POLICY: ABCSITEA> PAYLOADS: SA,PROP,TRANS,KE,NONCE,ID
[2008-12-02 23:15:20]<POLICY: ABCSITEA> PAYLOADS: SA,PROP,TRANS,KE,NONCE,ID,HASH
[2008-12-02 23:15:20]**** SENT OUT SECOND MESSAGE OF AGGR MODE ****
[2008-12-02 23:15:37][==== IKE PHASE 1(from x.x.x.x) START (responder) ====]

Note; I have replace the ip with X.X.X.X


Site A logs shows

[2000-01-01 00:28:28]**** SENT OUT FIRST MESSAGE OF AGGR MODE ****
[2000-01-01 00:28:2<POLICY: ABCSITEB> PAYLOADS: SA,PROP,TRANS,KE,NONCE,ID
[2000-01-01 00:28:48]**** SENT OUT INFORMATIONAL EXCHANGE MESSAGE(DELETE_PAYLOAD) ****
[2000-01-01 00:28:51][==== IKE PHASE 1(to x.x.x.x) START (initiator) ====]
[2000-01-01 00:28:51]**** SENT OUT FIRST MESSAGE OF AGGR MODE ****
[2000-01-01 00:28:51]<POLICY: ABCSITEB> PAYLOADS: SA,PROP,TRANS,KE,NONCE,ID
[2000-01-01 00:29:11]**** SENT OUT INFORMATIONAL EXCHANGE MESSAGE(DELETE_PAYLOAD

Have i missed any ports?
what's wrong?

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Did you get this fixed?

by JayM71 In reply to Site to Site VPN netgear ...

For one thing, on a VPN router to router connection, you shouldn't be using aggressive mode. They should be in main mode. Depending on the situation, direction can be both or one as responder and the other as initiator.

Collapse -

Site to Site VPN netgear FVS114 ProSafe VPN Firewall

by badrulislam In reply to Site to Site VPN netgear ...

can u check client to getway and remote client
under vpn wizard.

i think this will be the issue
create two policy for each.

hope it will be ok

Collapse -

Zombie Alert Zombie Alert....walking dead from 2008

by CG IT In reply to Site to Site VPN netgear ...
Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums