General discussion

Locked

SMC 2635W & D-Link 614+ Wireless Issues

By rbains ·
Hi;

I have a D-Link 614+ wireless rotuer. I'm trying to get my SMC 2635W EZ Connect Cardbus Adapter to work with it, but I keep on getting D-Link to defaulting to 192.168.0.x network, but the EZ Connect defaulting to 192.168.2.x network. This means I can't get an IP hence connection for my SMC on the Windows ME notebook. What am I missing here? I've already got another adapter (D-link DWL650+ to work with this router without any problems). The D-link is connected to cable modem.
Any help would be much appreciated. Thanks.
=== > Rob

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by rbains In reply to SMC 2635W & D-Link 614+ W ...

And Yes, I'm running DHCP on the D-Link 614+

Collapse -

by LMon In reply to SMC 2635W & D-Link 614+ W ...

Hello,
Get into the d-ling routers main page (type 192.168.0.1) on IE explorer. type in the password by default it is admin unless you or someelse changed. on the left side click on LAN change the IP address to whatevery it you want being 192.168.2.x hit apply to see if it works. If not go here to this sight they have an emulator that might help you out. http://support.dlink.com/techtool/di614+/emulator/h_lan.htm#

Collapse -

by LMon In reply to

type in the password by default it is admin unless you or someelse changed.

Sorry that is incorrect type admin for the username and leave the password blank unless changed

Back to Networks Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums