Discussion Locked

sound stutters and mouse arrow is choppy

0 helpful
8 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have two computers in my office that act really weird. One is an Intel 450 with 256 mb of ram. The other is a 1.3 GHz with 496 mb of ram. Both computers run Windows 98. No other Win98 machines in my office do this. The mouse skips around the screen and the sound waves stutter. This behavior is especially prevalent when first loading the desktop after logging in. This also occurs to music cds if you try opening a program while the music is playing. The sound stutters. I have already tried messing with virtual memory settings, disabling all startup options in msconfig. Nothing seems to help. These are brand new fresh installations.

8 replies

by thechas

If these systems have on-board sound, and not seperate sound cards, this behavior is common.

With on-board sound, the CPU is used as the sound controller (much like a "Win-Modem") when a higher priority process needs the CPU, the sound suffers.
Things that you can do:

Make sure ALL drivers are up to date.
The default W98 drivers are out of date.
Start with the chipset drivers for the motherboard.
Then, DirectX
Then the video and sound drivers.

If sound quality is important, you need to have a decent sound card.

Chas

by wcp

I recommend the following steps. You go to the next step if the problem persists.

1). Check for virus

2). Make sure you installed the most updated video driver.

3). Replace the video card unless it's integrated to the M/B.

4). Back up your data and reinstall Windows from scratch.

5). If the video card is integrated to the M/B, replace the M/B.

You may reverse 4) and 5) for your convenience.

by wcp

Oops. I missed your last line. Please disregard steps 1) and 4).

by cglrcng9

Did you install the motherboard drivers after Win98 was installed? This should be done after the OS is installed everytime, also try re-installing the sound card & mouse drivers after the update of the system board drivers.

This discussion is closed to new replies.