Question

Locked

STOP ERROR - SBS 2003

By ACGPHX ·
At distant intervals (maybe 2-3 days apart) I receive the following stop message in my system log. Naturally I get the enlightening welcome from Windows when I login that the below occurred.

>>>>
Event Type: Error
Event Source: System Error
Event Category: (102)
Event I 1003
Date: 11/24/2009
Time: 9:31:31 PM
User: N/A
Computer: XYZ-SBS
Description:
Error code 0000009c, parameter1 00000008, parameter2 808977a0, parameter3 be000000, parameter4 0001009f.

For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Data:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 30 30 30 30 30 30 39 0000009
0020: 63 20 20 50 61 72 61 6d c Param
0028: 65 74 65 72 73 20 30 30 eters 00
0030: 30 30 30 30 30 38 2c 20 000008,
0038: 38 30 38 39 37 37 61 30 808977a0
0040: 2c 20 62 65 30 30 30 30 , be0000
0048: 30 30 2c 20 30 30 30 31 00, 0001
0050: 30 30 39 66 009f
>>>

Microsofts "help" tells me its hardware but nothing more.

This is a brand new box (3 weeks old) with no old components.The system is a Xeon 2.66Ghz processor with 4GB of Registered ECC DDR3 Memory and SuperMicro X8SIL-F motherboard (flashed to date with the latest drivers for its components).

Any insight would be appreciated.

This conversation is currently closed to new comments.

6 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Do you have all the service packs

by CG IT In reply to STOP ERROR - SBS 2003

there was a problem awhile back with gigabyte network cards causing problems. Been a while back but the problem was with jumbo frames, Microsoft issued a patch for it so .... make sure you have SP2 for W2003 and all Exchange 2003 patches.

update all drivers.

I doubt it's a memory problem unless you get a BSOD Stop error IRQ less than

Then it's possible it's memory mismatch.

Collapse -

thanks

by ACGPHX In reply to Do you have all the servi ...

The SP's are verified to be up to daet...just rechecked them. The NIC's did cause me some concern. I actually disabled one of the onboard NIC's in favor of an add-on card. Now I'm running 1 onboard (internal) and another add-on (external).

I've updated the SuperMicro motherboard to the lastest of everything, some not even on their website yet, after talking to SuperMicro's support.

The memory is all identical, purchased at the same time frome the same vendor.

Maybe I'll swap out the NICS with two new Intel cards just for safty's sake.

thanks

Collapse -

You could try swapping the RAM around and reseating it

by Jacky Howe In reply to STOP ERROR - SBS 2003

http://support.microsoft.com/kb/162363

Check the memory.

You can test the memory by running Windows Memory Diagnostic that can be downloaded from http://oca.microsoft.com/en/windiag.asp. If memory problems are found, try re-seating the RAM. If it doesn't work, replace the defective RAM.

Let us know how you get on.

Collapse -

interesting

by ACGPHX In reply to You could try swapping th ...

I'm running the Xeon processor on a Xeon board. But I'll give it a try..thanks

Collapse -

Keep us

by Jacky Howe In reply to interesting
Back to Hardware Forum
6 total posts (Page 1 of 1)  

Related Discussions

Related Forums