Discussion Locked

Subwoofer volume too low with SBLive!

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a SBLive! (not 5.1) with Mecer Speakers (Model: SP-128) and a Mecer Subwoofer (Model: SW-128). Previously I had a SB Vibra 128 and had no problems with sound output.[OS=Win98, VIA Motherboard, Celeron 400MHz CPU, 128Mb RAM]

Now, I'm happy with my speaker output volume, but the subwoofer volume is way too low.
I'm sure that the subwoofer is working fine, 'cause I've tested it with other sound cards and systems.

Could my SBLive! be faulty?

To sum this up: The only problem is my subwoofer has low output volume.

Have anyone experienced this before?
(I don't want to solve this problem by bying Cambridge Speakers - or should I?)

Please help.

2 replies

by dmiles

Have you checked the back of the sub-woofer to see if there is a volume adjustment,the Cambridge woofer a switch to boost the bass sound and also to adjust the volume,so I am thinking that the sub-woofer has a similar control

Also check that you have the connecting cables set in the correct position

Open the sound blaster control panel and check the sound level and adjust to see if this helps

Buying the Cambridge is not a bad idea I like the current speaker system that I a have setup and I get good bass sound.

by nols

There are only two adjustments in the front of the Subwoofer - nothing at the back, only the in and out sockets. The cables are connected in the right sockets. Adjusting the soundcard in Control Panel and anywhere else I could find did not work. Whatever changes I make are heard through the speakers - not the Supwoofer.

I read somewhere that the SBLive! does not have an internal amplifier like most sound cards have. Could this be my problem??

This discussion is closed to new replies.