Discussion Locked

System Crash

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
On my exchange server that's using NT 4.0, I have the alert "Windows NT could not start because the following file is missing or corrupt. \WINNT\SYSTEM32\CONFIG\SYSTEMHardware Profile/Last Known Good menu. I tried to repair this from the NT setup disk and it told me that no hard drives could be found. Can I recover/repair this without losing any info and how?

7 replies

by rapidad

If your hard disk indeed has sensitive/important info on it remove it from the machine immediately. then get another drive, use it to make sure the rest of the system is functioning properly. load a new os and then add the first drive as a new secondary master or slave. make sure you set this in bios if your mobo doesnt auto detect. does the mobo see it as a drive? Boot the machine, are you able to read the data?? if not the drive may be at fault. there are several things that could be happening, starting with but not limited to having lost the mbr on the drive. it will now depend on how much importance you attach to your data wether you hire a recovery outlet or just try to reformat with say fdisk.

by fenaikh

Hi

IF you have an Emergency Repair Disk you could perform a reinstallation of Windows NT.

Windows NT could not start because Last Known Good menu is missing or corrupt
http://www.jsiinc.com/SUBB/tip0700/rh0732.htm

Off-line Registryediting
http://www.jsiinc.com/SUBA/tip0100/rh0182.htm

I hope your disk not crashed where you have to use a recovery utilitites such as:

easyrecovery
http://www.ontrack.com/easyrecovery

Good luck

Mohamed

***Very Important NOTE *********
After you copy the URL a space or a %20 maybe gets inserted in the URL when you paste it into your browser. Delete any spaces or such characters from the URL for the page to be loaded.
***Very Important NOTE *********

*** Warrning *********
Backup your registry first.
Editing and modifying the registry could result into a serious problems that may require you to reinstall your operating system.
*** Warrning *********

by kevin_goodin

Here at work we use ERD Commander 2002 to access failed OS files and then transfer the data onto an external firewire or USB drive. This is an expensive solution but it works very well.

This discussion is closed to new replies.