Discussion Locked

Terminal Server behind a Cayman 3220h ro

0 helpful
27 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello everyone,

I am having difficulty establishing a connection with my terminal server from a remote location. the Terminal server is behind a cayman 3220h router. I opened internal and external tcp port 3389 (the windows 2k default for this server) ... any suggestions on what I may be missing or doing wrong? thanks guys!

Jeremy Scogin
IT Coordinator

27 replies

by joseph moore

Well, TCP port 3389 is the correct port for TS. So, I would do a port scan from the remote location, to make sure your router really does have the port open, and that it you are successfully connecting to your Win2K server.
www.nmapwin.org
Go there for NMAP for Windows.

by ann777

Are you getting any event viewer error messages that you can add in a comment?

See what your SynAttackProtect registry key is set to:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q304714

Make sure TS is set to 3389:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q187623

Maintaining a TS connection:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q284439

Limited connections:
http://support.microsoft.com/default.aspx?scid=kb;en-us;Q232476

We need more information on what errors you are getting.

by shmaltz

What are you using for the name of the server. You have to make sure that the computer you are logging from can resolve the name you are using to the TS Server. If you don't have a DNS entry that points to the TS then you will have to put in an IP Address. If you are using NAT you will have to map the public IP address to your internal address.

by choppit

Assuming that the TS works from the LAN side;

1. Check that TCP port 3389 is port forwarded.

2. Check that the terminal server gateway is correct.

3. Try the advanced web client.

by int

Reset the router

set netbios on

is there a firewall integrated in the cayman router, make sure this doesnt block the ports

INT

by duncan

Hello everyone,

I'm have the same problem.

TS works fine inside network. Have forwarded port to server. Tried connecting with public ip address. Can telnet ok.

Error message is: can't connect to terminal server.

by dlafrombois

I not as familiar with MS TS as I am with Citrix Metafame but could you problem be in the netbios discovery of the remote network. Maybe you need to place the servers IP address and domain into the LMHOST file of the remote client so it can see theserver.

by lordinfidel

If you beleive that if you have done Port Forwarding, assigned the NAT rule to the associations.

And you have enabled inbound and outound communication to the internal machine.

The next step is: Are you the SuperUser on the router.

I say this because if you are not logged in as the SuperUser, no matter how hard you try, port forwarding will not work.

To tell if you are logged in as the superuser, in the main screen you should see 'security'. If not, then that is part of your problem.

I am assuming thought that the location housing TS does have a static IP and has a dedicated connection.

by kenderkn

hi, had same problem with a cayman router (cant rememeber the model number) . to fix it i enabled 3389 TCP and UDP. without the UDP it didnot work. i searched for this on technet and at caymans site but nowhere does it mention UDP being required.

you might also try vnc, its free and works pretty good. you can get it at download.com

hope this helps

jas

This discussion is closed to new replies.