Windows Forum

Ask something
Discussion Locked

Terminal Services

0 helpful
1 reply

by ninoe

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I have about 30 Win2k Servers/Advanced Serves running Terminal Services in the remote Admin mode, of the 30 one Win2k Advanced Server bluescreens each time a client tries to connect and one just don't allow a client to connect, no error message or anything. Terminal Services work fine on all other servers. Any ideas? Note: I have lates service packs and I have un-installed and re-installed terminal services.

1 reply

by shmaltz

Are you talking about BSOD or just a blue screen?
If it is the later, the problem might be that it can't load the profile. Try loging on with a local admin account.
The one that doesn't allow you to connect, make sure that TCP port # 3389 is open on all firewalls leading to that Server. Also make sure that the Terminal Services Service is started. Also make sure that IP filtering is not enabled, and if it is that TCP port 3389 is allowed. If this still doesn't help, do you have any other network problem with those 2 servers?

This discussion is closed to new replies.