Question Locked

The Instruction at"0x0049cb16" referenced memory at "0x00000000".

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Has anyone seen this error before. YourApp.exe-Application error: he Instruction at"0x0049cb16" referenced memory at "0x00000000". The memory could not be "read". Click on OK to terminate the program. What can I do to fix?

5 replies

by Former member

You might want to check your system to see if everything is ok. Have you added anything new to your system?
I have listed some things here:

You are running the processor or mainboard beyond its specifications. For example, you are overclocking the processor or bus. We recommend that you run your hardware at the manufacturer-rated speeds.
? Noisy power, overstressed power strips, outmatched power supplies and failing power supplies can destabilize your computer. Make sure that you have a stable, reliable power supply to your computer.
? Extreme thermal conditions caused by the failure of cooling devices such as fans may damage your computer. Make sure that your cooling devices are all working.
? You have damaged memory or memory that is not the correct type for your computer. If you recently changed the memory configuration, revert to the previous configuration to determine what is wrong. Make sure that you are using the correct memory for your computer.

Please post back if you have anymore problems or questions.

by hector.gomez

The application is called Fleet Focus but the message happens every once in a while not all the time

This discussion is closed to new replies.