Question Locked

Trogen-Gen help

0 helpful
19 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hi all, my pc contracted a virus recently and I have not been able to get rid of it. Although Avast recognises the virus, it seems to be reinstalling as it reappears when i put it in the chest or delete it.
Please help me because the virus may have stopped my antivirus programs from downloading updates, and i can not get to windows related web sites either...

I have Winxp sp3...should i first turn off windows recovery thing and then post a hackthis log? do i generate the log in safe mod?

Thanks for the help.

19 replies

by garyh40

Hi Kris,
Malwarebytes is good, but run a full scan, also use spybot and McAfee stinger their free to download from the net. After you have updated and scanned with them, restart your PC and run a full scan again with malwarebytes. Then download all microsoft updates and install an antivirus like AVG 8.5 again this is free and set it to update every day and a full scan once a week. This should fix your problem and help stop you getting any more malware or trogens.

Regards Gary

by kris.spiers

I did a malware scan and it found some things which it removed successfully, spybot also found some things to remove and asked me to restart, which i did. Heres the problem

the virus wont allow any anti virus programs to update, and i cant get to any windows or virus protection websites.. so i downloaded stinger on another pc, but when i try to open it on the infected pc it says that stinger is infected and can not contine- have tried downloading it twice....

also after downloading AVG 8.5 i can not update it, which probably leaves it out of date and useless...

im pretty sure this virus keeps reinstalling it self, no matter how many boot scans i do and how many time it have removed it... please help

thanks

by garyh40

Hi Kris
This is your last resort, remove the HDD from your PC and put it into another PC as a second drive. If your infected computer is a laptop with a sata drive you will be able to connect this to a PC that uses sata drives.
This is a lot of work but I have done this on many occasions with client pc's and laptops. It works most of the time.
OK back to what you have to do, when you have installed the HDD, install malwarebytes on the our pc and update it, now run a full scan, it will give the choose of drive to scan, only scan your HDD that you put in the pc.
If it finds stuff things are looking good, put the HDD back in your computer and scan with malwarebytes and spybot again. I told you this is a lot of work.
If it doesn't find anything while connect to the other pc the virus is still there, but you can access you data and safe it to the other pc. you'll then have remove the HDD and put back into your pc and reinstall XP and wipe your HDD, at least you will have save your documents and photos on the other pc.
Good luck, I know what this is like, I do it nearly everday and sometimes it wreaks my head.
Gary

by seanferd

If you rename Stinger, it might work.

Same goes for MBAM - rename it if necessary, and run it in Safe Mode.

by kris.spiers

the scan on the other pc came up clean...bad news i guess. How do i clear the drive completely, reformat? or just delete everything thats on it?

by kris.spiers

Im trying to move my important files of my hard drive so that i can wipe it but on the computer im doing it off its coming up with Vista user permissions error (saying that i don't have the admin rights to move these things)!!! ive gone through all the security center links to try and get the permission but it wont work !!

by rob miners

System Restore as that is where they like to hide. Also check in C:\> for autorun.inf and let us know if it's there.

Put the drive back where it came from and try this.

If you can get into Safe Mode turn of turn off System Restore.

Removing malware from System Restore points
To remove the malware, you must first disable System Restore, then scan the system with up-to-date antivirus software - allowing it to clean, delete, or quarantine any viruses found. After the system has been disinfected, you may then re-enable System Restore. The steps for disabling System Restore vary, depending on whether the default Start Menu or the Classic Start Menu is being used.

Default Start Menu XP
If using the default Start Menu, click Start | Control Panel | Performance and Maintenance | System. Select the System Restore tab and check "Turn off System Restore".

Classic Start Menu XP
If using the Classic Start Menu, click Start | Settings | Control Panel and double-click the System icon. Select the System Restore tab and check "Turn off System Restore".

Vista
Start, right mouse click Computer and select Properties. Select Advanced System Properties, click contine and then System Protection. Untick the box nect to Local Disk C: and click on Turn System Restore off.

After scanning the system and removing the offending malware, re-enable System Restore by repeating the steps, this time removing the check from "Turn off System Restore".

Click Start, Run type msconfig and press Enter.

Now if you have the Configuration Utility open.
Configure selective startup options
In the System Configuration Utility dialog box, click the General tab, and then click Selective Startup.
Click to clear the Process SYSTEM.INI File check box.
Click to clear the Process WIN.INI File check box.
Click to clear the Load Startup Items check box. Verify that Load System Services and Use Original BOOT.INI are checked.
Click the Services tab.
Click to select the Hide All Microsoft Services check box.
Click Disable All, and then click OK.
When you are prompted, save the settings and restart the System.
When the System is disinfected re-run the Configuration Utility and in the System Configuration Utility dialog box, click the General tab, and then click Normal Startup.

Download Combofix and rename the executable Combofix.exe to cfix.exe before running it.

http://www.combofix.org/

http://www.combofix.org/download.php

by kris.spiers

I disabled system restore a few days ago when i was attempting to get rid of the virus my self...It didn't seem to make any difference.

by rob miners

DBAN will overwrite the hard drive filling it with 0's and 1's completly wiping the drive of information. You then create new Partitions, Format and install the OS without having to worry about a reinfection. Any traces of the Viral infection should be annihilated.

Darik's Boot and Nuke.

http://dban.sourceforge.net/

Autonuke should do it by running it at least 3 times.

by kris.spiers

Hi, I wiped my hard drive and successfully installed windows (typing from the computer that was infected now) The virus is gone....

New Problem though...I found my winxp CD but not the paper sleeve that the CD came in which had my CD code on it.

Is there anyway to get my code...Or any way around this?

by kris.spiers

After reinstalling windows, everything was running fine for a few hours, then my virus protection (Avast) keept on finding viruses which i moved to the virus chest. -Windows now wont come to the xp logging screen (it goes to a windows 2000 looking one) and when windows starts i get two or three data execution prevention errors and explorer wont load.....(after getting task manager up and running windows explorer manually) i find that i have the same problems, (i can not access security websites or update anti virus software again)

How can the virus still be there if i wiped my hd?

thanks

by kris.spiers

Hey I managed to get rid of the virus this time. I reformated/reinstalled windows again and did a Virus scan of the portable hard drive that i saved my important stuff to and it can up with the virus through all of it...I was able to repair most of the files and deleted another couple and now everythings going fine--found my xp CD code too- it was on my old computer!

by garyh40

Hi Kris
I'd say you were pulling your hair out, but now is the time to beef up you security, you know now what viruses and malware can do and you don't want to go through all that again.

1. Make sure your firewall is always on.

2. Scan for Microsoft updates, do this 2 or 3 times until it tells you there are no more updates available.

3. Install AVG8.5 and schedule updates for everyday and full scan once a week.

4. Also it would be no harm to scan with malwarebytes once a week.

5. Another piece of software I use is spyware blaster, you can get from http://majorgeeks.com/

I'm sure other people have suggestions, but I find this works and you don't get annoying pop ups asking you are you sure you want to do this or download that, remember you know how hard it is to get ride of it, so keep your security up to date.

Good luck, regards.

Gary

by kris.spiers

Thanks for all your help. Ill check out this software....thanks again.

by skdtech

I was able to clear a Trojan-Gen infection with an Avast Boot-time scan. The AVG 8.5 my client had installed did not detect the problem, YMMV.

I have found Regular scans with Malwarebytes Anti-Malware and SpybotS&D as well as using Spybot's immunization feature goes a long way to helping keep a computer clean.

I would also recommend using Firefox with Adblock Plus addon.

This discussion is closed to new replies.