Software

Ask something
Question Locked

Unable to reset lan printer password.

0 helpful
3 replies

by inachu

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

This is a HP printer 1000DN

Kinda old.

I did a cold reset. Password is now gone.

So now I configure printer for DHCP.
Next I hookup printer to lan.

Then apon getting an ip addy from dhcp now the printer has a password that can not be changed.

What steps to fix this? WEBJET admin remote tool thing does not reset it.

At a complete loss.

3 replies

by tig2

Leave the pass field blank?

Try "administrator"?

Try "Administrator"?

Try "HP 1000DN"?

Try your administrator pass for your console?

Call HP?

I have never had a printer pick up a password before so I am just throwing out ideas.

Good luck!

by entawanabi

Replace the fuses on it and check that the master circuit feed [the cord that plugs into the wall were it attaches to the machine for wear] If these are in good shape then the IP and IDENT board is right there in the machine and push the reset or release button to inset a new loggon or to create a volumne so that a number of logons can be set there.

Enta Wanabi

This discussion is closed to new replies.