Discussion Locked

Unattended Installs of NT4.0 OEM disk

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I am doing a lot of installs every month in new systems with the same config and so far have been doing them manually (yuck). I found some articles here on the subject of Unattended Installations but I still have a couple of questions.

Each copyof the OEM OS CD will have it's own registration number as you know, and I am hoping that I can just put a new OS disk in each system drive and the relavant info will just be pulled off the disk. Do the processes in the UDF, Unattended.txt, and SYSDIFF tools work for this kind of installation or just with a site liscense? If not, what do you suggest?

My other question is if I can leave the user info blank during the install and put it in later. I know it is possible because big PC integrators do this but I don't know if I can duplicate it with OEM disks.

I appreciate any insight/advice you can offer.

1 reply

by rdunn

Unfortunately, there isn't any differing information on the OEM CD that you could pull the licensing information from to auto-populate your product number with.

You have 3 options:
1. The number will have to be manually entered for each PC (the automated install will wait for the input)

2. If you can keep track of your licenses, you can put one number in the unattended.txt file, and all your PCs would have the same number. As long as you had a count and listing of numbers somewhere, you'd still be legit - this might cause other issues though if you are tracking licenses through SMS, etc.

3. A combination of the two above. If you create your unattended.txt files ahead of time, you can create some macro, requiring your input, that could update the number before you ran the automated installation on your PC. This obviously would exclude using an automated CD installation (limiting you to network shares, etc.).

Finally, regarding your user info question - I assume you're talking about the PC name, organization name and user's name? You'll NEED a PC name - but If you don't enter a value for the others, you'll be prompted during the install - I assume that you are wanting to set up some PCs ahead of time and change the info later? You might look into some 3rd party utils that will let you modify this information after the fact.

Well - I know that was lengthy, but I hope it helps!

This discussion is closed to new replies.