Discussion Locked

Upgrading a cpu from fsb 200 to fsb 266

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Hello,
I wish to upgrade the processor on my socket A motherboard from its present duron 900mhz to an athlon 1.4ghz. My motherboard is rated fsb 200 and the processor is a fsb 266 one. Will the new 1.4ghz fsb 266 processor work on a motherboard rated fsb 200. Thanks in advance.

7 replies

by d_v ant

While the processor SHOULD work on a 200 Mhz FSB, it will not run at 1.4 Ghz. It will be closer to 1.1 or 1.0 Ghz. If you want to get the full performance, either purchase a 200 Mhz processor or a new mobo that has a 266 Mhz FSB.

Hope this helps...

by dmiles

Research the CPU to see if the upgarade will be supported on the motherboard,you will need to reference the motherboard manual to see what jumper settings need to be changed on the motherboard to support the 266fsb,check the manufactuer's web site to see what your options are.
Ref
1)www.tomshardware.com
2)www.amd.com

by akula

It should work (check with the mb manufacturer, you may need a BIOS upgrade), but it will NOT fun at full speed. The actual clock speed of the CPU is determined by taking the fsb (actually 100 or 133MHz, it is just double pumped) and multiplying bya clock multiplier, which is burned into the chip. For the 1.4GHz Athlon, it is 133MHz * 10.5 multiplier. However, with a 100MHz bus, it will run at 1050 MHz. It should work, but it won't be as fast. For full speed, you will need a new motherboard.

This discussion is closed to new replies.