Question Locked

USB and Vista. Beeps on insertion of USB cable

0 helpful
2 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Howdy all, just wondering if anybody can help here...

Inserting a usb device I get 3 low beeps insdtead of the 2 beep successful connection attempt sound. No error message but no usb device either. A time back when I first tried to use it I remember clicking something without knowing what it was (its a japanese OS) I dont read Japanese. Anyhow, I am worried that I blocked the USB device or something, I have no idea. lol. Does anyone have any ideas?

Thanks!

2 replies

by rob miners

You must be able to find your way around to be able to do anything. I think you need an interpreter, I have seen a Japanese version of XP. Anyway see how you get on. ;)

If you are using a USB cable with your device, check the cable to make sure it matches the speed of the device. Use USB 2.0 cables with USB 2.0 devices. Swap the cable and check the device.

Check your Power Management settings in the USB Root hubs as it could be turning off the hub and giving your device recognition problems. if it is enabled, Disable it.

Unplug all the USB devices except your mouse and keyboard.
Boot Windows in to Safe Mode.
Open the Device Manager and expand the Universal Serial Bus controllers section.
Right click every device under the Universal Serial Bus controllers, and then click Uninstall to remove them one at a time.

Shut down and reboot the PC normally. Windows will then re-install the USB controllers and add your USB devices.

This discussion is closed to new replies.