Question Locked

USB causes blue screen of death

0 helpful
4 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

Whenever I plug into any of my USB ports I get a blue screen of death with the error message

Stop: 0X000000F4 (OX00000003, 0X8600A788, 0X8600A8FC, 0X80604418)

I'm trying to figure out what is causing this error message. It has to be some hardware in my computer or software because I've tried multiple USB peripherals, and they both cause the same problem. It takes anywhere from a couple seconds to a couple minutes of actually dinking around in the memory of the mp3 player or flash drive for the BSOD to come up. If I leave it plugged in, it could be running for days and nothing will happen.

Thanks in advance for your help

4 replies

by cg it

0x000000F4: CRITICAL_OBJECT_TERMINATION
This is almost always a pure-software problem. (Almost. I received this bugcheck when in the process of copying files from a known-bad drive that was attached to my Primary IDE channel as a slave. --DjLizard 10:47, 18 May 2006 (PDT)) As with all other bugchecks, this can also be caused by faulty memory modules.

[edit] Parameters
No. Description
1 The terminating object type:
0x3: Process
0x6: Thread
2 The terminating object
3 The process image file name
4 Pointer to an ASCII string containing an explanatory message

Retrieved from "http://wiki.djlizard.net/STOP_errors"

That's for Stop: 0x000000F4

by older mycroft

Sorry, but if you consider 'TWO' to be multiple usb peripherals, the judgement is hardly conclusive.

You could very well just happen to have two dodgy usb sticks.

You may also have two usb sticks that both contain a damaged file - which is the root cause of the BSOD.

by the scummy one

your chipset drivers for your motherboard. This may correct your problem.

Also, verify your power supply as well, if it is dodgy, this may happen.

This discussion is closed to new replies.