Discussion Locked

USB key causes crash of PC

0 helpful
6 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have a HP d530 3Ghz, 2Gb ram.
When I plug in certain USB keys, the screen will go immediately black and the pc will be completely locked up and need a full reboot.

This only happens with certain USB keys.
One that causes this is a SanDisk Titanium Cruzer, but I tried another SanDisk Cruzer that works fine.

When I plug the keys that cause trouble into another pc they work fine, it is only this one pc, and only certain usb keys.

I've scanned the keys and the pc with antivirus (AVast) and anti malware (malware bytes) programs with clean results.

Any thoughts on what might cause this?

Thanks!
Charles

6 replies

by nicknielsen

Or just certain ports?

If the former, you may have power issues, mainboard problems, or the keys themselves may be going bad. If the latter, you've probably got a bad port or two.

by pattcom

Yes, it happens the same on all usb ports.
I just tried it in safe mode and it crashed there as well.

Could it be power issues? could some usb keys take more power than others?

I could try an external self powered usb hub and see what happens.

thanks

by pattcom

I connected an AC powered USB hub and all my keys work fine now.

Hmm, I wonder if this might be indicative of a power supply issue, or more of an internal usb hub power issue? Are the internal hubs usually part of the motherboard?

thanks
Charles

by nicknielsen

The internal hubs are indeed powered off the motherboard. I suspect the actual issue is the initial surge as the device powers up loads the motherboard power enough to affect the processor power.

The power supply may be operating near max load or the voltage regulator on the motherboard may be failing.

As you've "solved" the problem, you'll most likely find the answer when/if you add something to the PC.

by pattcom

My son pointed out that I also have the keyboard and mouse powered off the usb ports, it could be that one of them is drawing too much power as well.
Once when I put the working usb key in, the warning popped up saying it was drawing excessive power. I may move the keyboard and mouse to the AC powered hub and try that.

Thanks

by ismail.magued

first quetion
is windows vista installed on your HP pc.

second question
how many times have you tried the usb on your other pc?

another question
was it first time you tried your usb on your other pc?

another question in what order did your usb on your pc's exactly accurately?

the reason I ask this is because some scan disks have a smart program installed which remembers the settings of one pc.

so for that particular type of usb drive can only be used on one pc and particularly windows xp.

so in other wards the flash most likely disrupted your bios.

to make sure of the above statement i need to you answer all the questions as accurately as possible

ok well i will check back for a reply regularly

This discussion is closed to new replies.