Question

Locked

USB Problem

By nir_pat22 ·
My pen-drive is not detected & i got error as mentioned below in properties of USB device from device manager:

"Windows successfully loaded the device driver for this hardware but cannot find the hardware device. (Code 41)"

How can i solve this problem?

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

What is shown in Drive Management?

by OH Smeg In reply to USB Problem

Also this may help

If more than one device is listed, boot to Safe Mode > Device Manager and
"Uninstall" all devices listed in "Keyboards", otherwise continue in your normal
desktop.
In "Device Manager" expand "Keyboards".
Right click on the listed device and click "Uninstall" in the popup menu.
Close out of Device Manager back to your desktop.

Open either Explorer or MyComputer.
Expand to and delete the contents of:

C:\Documents and Settings\Your Username Folder\Local Settings\Temp
Click once in the right pane.
Press ctrl+a.
Press the Delete key.

C:\Windows\Temp
Click once in the right pane.
Press ctrl+a.
Press the Delete key.

C:\Windows\Prefetch
Click once in the right pane.
Press ctrl+a.
Press the Delete key.

Close out of Explorer/MyComputer back to your desktop and reboot.
Windows should redetect the USB Keyboard and reinstall drivers for it.


Or you can try this it might work

WARNING: If you use Registry Editor incorrectly, you may cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that you can solve problems that result from using Registry Editor incorrectly. Use Registry Editor at your own risk.

To resolve this behavior, follow these steps:
Start Registry Editor (Regedt32.exe).
Locate the UpperFilters value under the following key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

On the Edit menu, click Delete, and then click OK.
Locate the LowerFilters value under the same key in the registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

On the Edit menu, click Delete, and then click OK.
Quit Registry Editor.NOTE: After you remove the Upperfilters value and the Lowerfilters value, if you notice lost functionality in a particular program, such as CD recording software, you may need to reinstall that software. If the problem recurs, consult with the software vendor for assistance.


Restart your computer.
STATUS
This is a known issue that can occur when you remove Easy CD Creator version 5.01 or earlier or DirectCD version 3.01c or earlier. This issue may also occur with Easy CD Creator version 5.01 and with DirectCD 3.01d or later.
MORE INFORMATION
There may be other third-party CD-writing software products that exhibit similar behavior. Some or all of the troubleshooting steps in this article might apply if such a product also adds entries under the UpperFilters or LowerFilters value in the registry, either by adding its own filter drivers or by removing the registry keys and values outlined in this article that begin with:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}


However before doing any of the above I would first make sure that the Device is actually working in another computer. You do not need to mess up your OS and need to reload because of a Faulty Thumb Drive.

Col

Back to Hardware Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums