Discussion Locked

Using all of my hard drive

0 helpful
1 reply
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
I was wondering if anyone could help me with my hard drive. I installed the 60 GB hard drive a while ago and don't exactly remember how I partitioned it. I used a FAT32 partition and it allowed me to partition it to 31.4 GB, but the other 28 odd gigs wasn't partitioned into the drive. At the time, I don't know why, but stupidly, didn't do anything about it, but started using the 31.4 gigs. The drive is about full and I was wondering if there was anyway to get back the space. Using Disk Management in XP it recognizes the disk as only the 31.4 partition and there is no sight of unallocated space on the disk. Thanks for any advice!

1 reply

by cesar_biosca

OPTION 1
1 click under start
2 click under run
3 type CDM
4 Once the window is opened, type fdisk
(Hope You know how to use it)

OPTION 2
1 get partition magic
2 once You are running it go to menu disk and select the secondary
3 immediately the map of the disk must appear
4 under menu partition You should may be reformat or resize or the proper option according to what happened to the other 28 GB

This discussion is closed to new replies.