General discussion

Locked

VIDEO CAPTURING

By rubsmong ·
VIDEO CAPTURING
I bought a video editing card from VCD PRODUCER PRO so that i could download music and movies from my DSTV DECODER directly to my computer. I installed the card and connected the V-Out from the decoder to the V-In of my card and clearly specified in the hardware capture softare (AP) that the source was V-In 1, i then connected the other 2 Audios in the Audio In of the card. My captured picture is very unstable, moving up and down and eventually getting lost, i have tried changing the settings i.e from PAL I TO PAL M TO NTSC and the like but still it is not clear, could it be the cables since am using home made ones or what.

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

by DouglasB In reply to VIDEO CAPTURING

Is this capture card strictly a capture card (the monitor does not plug into it)? If not, you need JUST a capture card to do the work. You do not mention the speed of your computer, RAM, Processor, Hard Drive. This type of activity takes a fast system.

Collapse -

by rubsmong In reply to

this is a real video editing editing card, the monitor does not connect to it and i believe that my machine is pretty fast! what with 2.8Ghz genuine Intel processor, 512Mb DDR RAM, Intel645G 400bus motherboard, and 120GB hard disk drive and a 64Mb ATI Radeon AGP card.I bliv the problem is not caused by my machine being slow, anyway thanks alot for your reply.

Collapse -

by rubsmong In reply to VIDEO CAPTURING

This question was closed by the author

Back to Hardware Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums