General discussion

Locked

Virtual Private Networks

By gervaisg ·
Hi all, I just install RAS on an NT Server 4.0 with service pack 6. I install the PPTP protocol and setup the server for VPN connections over the Internet. I have managed to get connected. I can ping the pc's on the network but I cannot view certain pcs.
From my home using windows98 with Virtual Private Networking installed I was able to find the server using the IP address.
When I view the log file, it said that the port speed was only 9600.
Could someone explain to me how to open that port (what port?)
I have no idea what port to open because I'm using a DSL connection to the Internet and the network that I'm connecting to is 100BaseT. I tried to download a file and it took for ever.

gervaisg@onlink.net

This conversation is currently closed to new comments.

1 total post (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Win98 VPN client

by asavelyev In reply to Virtual Private Networks

That`s right, it`s very slow if you are accessing your Network from Win98 client by modem. Try DSL, ADSL, cable, whatever is faster and you`ll see the difference. Also try to configure a VPN connection on your client Win98 machine with NeTBEUI and enter your Network`s WINS Servers IP addresses at TCP/IP settings. About "Port" - it`s just a virtual port, RAS terminology. And speed of 9600 it shows is not real speed.

Alex Savelyev alex@ppimtl.com

Back to IT Employment Forum
1 total post (Page 1 of 1)  

Related Discussions

Related Forums