Vlan config question for voip deployment?

By rlynch@lockhartcadillac. ·
Im deploying some ip phones along with an ippbx and just had a question regarding vlans using the sonicwall enhanced os on nsa240. Want to make sure i have vlan and qos setup properly. I have a few cisco sg300 28 port switches that I have researched how to configure the vlans on, I have also researched how to give the phone themselves a vlan tag (say vlan200) from within their web gui as well. I was hoping that someone could help me with the sonicwall part of it all. It acts as our firewall/router and need to configure it for the vlans. I only have one drop in each office so the phone and pc will share switch port. I would have 3 of these switches because we have 3 separate building. From what I can see, I would give the phone a vlan tag that matches what I setup in the switch vlan200. So when they fire up, they know to look for the vlan200 dhcp and get the correct address info. What do I do with sonicwall? Just setup vlan as a subinterface on the lan interface and give it the 200id, or do I need to configure a completely separate physical interface like x3, or x4 for this vlan. Any help would really be appreciated, and let me know if you need anymore details about the network setup. I dont necessarily need these two subnets to talk to each other, but would like both to have access out of the sonicwall to the interent. Thanks again..

This conversation is currently closed to new comments.

Thread display: Collapse - | Expand +

All Answers

Share your knowledge

Related Discussions

Related Forums