Question

Locked

VLAN Issues

By nsnoonan ·
I'm having trouble setting up additional VLANs on a network. The equipment currently in question is one Juniper SSG-140, and two HP ProCurve 3500yl. There will be additional hardware after this is working correctly (mainly several HP ProCurve 1800-24Gs). The current setup is something resembling:

---------------------
primary 3500yl:
ip routing
ip route 0.0.0.0 0.0.0.0 192.168.0.254 (the juniper)
vlan 10
name "vlan10"
ip address 192.168.10.1 255.255.255.0
exit
router vrrp
vlan 10
vrrp vrid 10
owner
virtual-ip-address 192.168.10.1 255.255.255.0
priority 255
enable
exit
exit
--------------------
secondary 3500yl:
ip routing
ip route 0.0.0.0 0.0.0.0 192.168.0.254 (the juniper)
vlan 10
name "vlan10"
ip address 192.168.10.2 255.255.255.0
exit
router vrrp
vlan 10
vrrp vrid 10
backup
virtual-ip-address 192.168.10.1 255.255.255.0
priority 120
enable
exit
exit
-----------------

We have several other vlans currently working that are set up the same way. What I'm having trouble with is finding a route to the 10. subnet (including the primary finding the 10.1 address that should be itself). The Juniper doesn't seem to have any routes set up for the other subnets working on vlans set the same way (1. 2. etc.) except for a blanket 192.168.0.1/16 route. That route seems like it should also work for the .10 subnet.

I have a small bit of a time line to get this all up and running, so any suggestions or possible solutions would be greatly appreciated.

-----------------
UPDATE:

A closer look (a "show vrrp vlan 10 vrid 10" command) shows that the Master's IP Address for the new VLAN on both 3500yl's are 0.0.0.0. The manuals suggest that this means the VR is disabled. I know there is some small command I've missed but I'm still having trouble finding it.

---------
Update 2:

Looks like it's a bit of user error. I was not aware that the virtual ip would not be active if you didn't have any ports tagged with devices plugged into them. Works just fine...

Please either disregard this post or learn from it :)

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Back to Networks Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums