Windows Forum

Ask something
Discussion Locked

VPN Access to Resources

0 helpful
7 replies

by samer

Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We have a 2k client accessing a 2k server over VPN. Connecting is fine. But how do you access resources of the domain you are connecting to. We can see the resources of the 2k VPN machince but none of the other machines on the domain we are connecting to.
MUCH Thanks!!

7 replies

by grbeebeii

You need to allow Routing on your server, you can do this through Administrative tools under Routing and Remote Access. You should then find a checkbox to "allow routing" for the VPN connection on your Server.

by samer

The RAS server already has allow routing and Demand Dial and LAN enables. I'm thinking I need to set up some static routes.

by grbeebeii

Okay, then let's try something else. I've worked quite a bit with RRAS, and if you want I'll keep working with you 'til we get it. Unfortunately, I don't always have ready access to a Win2K Server. Normally you should not have to create any routes to enable routing onto the Network. When you enabled RRAS, did you set this server up as a VPN Server, or as a Remote Access Server, or Internet connection Server? I assume that all resources from the Network are accessible from the W2K server you are dialing into. Are you using a domain account to dial in, or an account that only has local Server logon rights? Is this a Domain controller or member server? Are you using this server as an Internet connection server for your Network or onlyas a Remote access server? What other functions does it serve (DNS, NAT, ...)?

This discussion is closed to new replies.