I have problem creating Tunnel beetwen two linksys routers, RV042 (with public IP), and BEFSX41 (with dynamic IP, dyndns).
On RV042:
I create gateway to gateway tunnel,
Local Group Setup – IP only (public ip)
Local Security Group Type – Subnet, IP adress (Local LAN where RV042 – 192.168.0.0)
Remote Group Setup – dynamicIP with domain name
doamin name: user.dyndns.org
Remote Security Group Type – Subnet, IP adress
(Local LAN where BEFSX41 – 192.168.1.0)
IPSec Setup
IKE with preshared key
phaze 1 and phaze 2 Group1/DES/MD5
Perfect Forward Secrecy – checked
Advanced – Agressive mode checked
On BEFSX41
VPN Tunnel name: same on RV042
Local Secure Group: Subnet -IP adress (Local LAN where BEFSX41 – 192.168.1.0)
Remote Secure Group:Subnet- IP adress (Local LAN where RV042 – 192.168.0.0)
Remote Security Gateway: IP adress – (public IP of the RV042)
IPSec Setup – same as on RV042
IPSec Pass Through :Enable
PPTP Pass Through :Enable
L2TP Pass Through :Enable
I tryed to connect from BEFSX41, but with no effect, even with different IPSEc setup.
I think it could be problem with port forwarding,
I forwarded, on both routers, all ports that have some link with IPSEC tunnel connection(UDP 500,1701,4500; TCP 50,51,1723,443,47,1792). I forward that ports to local IP adress belong to RV042(192.168.0.1) and BEFSX41 (192.168.1.1),
but with no effect
If anybody can tell what could be problem, i suppose that when i make tunnel, every PC that have gateway RV042 or BEFSX41 on the other side, can communicate, as same as OPEN VPN provide.
