Discussion Locked

VXD stop error on 98SE - how do I fix?

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
A machine I support al of a sudden got a VXD error and will not boot up, and if restarted keeps rebooting it self. I know I can reinstall a fresh version of windows, but I would rather not have to reinstall all the thrid party programs. Does any one know a quicker way of taking care of this. It will not boot in safe mode either. Nothing has changed on the system.

10 replies

by ann777

Do you know which VXD is the problem? You might try pulling the network card and then seeing if windows will boot up.

If it does, then boot to safe mode and remove all network protocols. Then shutdown, reboot normally, run a scandisk and defrag and then shutdown again. Reinsert you network adapter and reinstall it.

Most sudden VXD errors (without installing new hardware) seem to be caused by a corruption of the network drivers.

---

NB: You can re-run setup.exe from the Win98SE cd on top of the current installation without having to reinstall "third party programs."

Also, if you can get into Windows, you may be able to extract the specific VXD file from the Win98SE cd. But you need to know the specific VXD that is creating the problem.

by opatzg9

HELLO BOOTDISK.COM.
boot from diskette or cd, chances are the vxd in question is findable in the win.ini or system.ini, comment the line/lines out and boot normal. Then fix what isn't working.

by gangadhar_hm

1) IF U INSTALLEDANY ANTIVIRUS SOFTWARE ,BOOT THROUGH SAFE MODE COMPLETELY UNINSTALL ANTIVIRUS SOFTWARE & RESTART IN NORMAL MODE.WHEN IT BOOTS NORMALLY INSTALL FRESH COPY OF ANTIVIRUS SOFTWARE.

by tk3423

Does it keep rebooting on its own? If it boots up to that vxd error and press hit to go by it into Windows. If you can do this, search the registry for the vxd and remove any occurances that it finds. Was some software recently uninstalled? Thatcan cause those vxd errors on startup.

This discussion is closed to new replies.