Discussion Locked

Which's better 72000 or 54000rpm IDE HD?

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

i am planning to install a 40 G, Hard Drive which is 54000rpm. Will the performance of this Hard Drive will suffer because of this?, and What are the Revolutions per minute haave to do with the HD performance?. Will the speed of the transfer of date decrease due the 54000 rpm, will a 72000rpm make a better performance?
Thank you for your comments.
Luis

5 replies

by timthetoolman

Hi,

Yep, All things being equal, a disk's spin rate is directly proportional to the speed the data comes off.

As you can imagine, if the disk spins faster, more of it moves past the heads in a given time... But the real speed the data comes off depends on a lot of things.

a. The number of platters in the disk - hard disks these days are actually built up of several platters in that little case.

b. The number of heads.

c. The density of the magnetic material on the surface - obviously a higher density allows more data to come off for a given amount of disk to pass under the head...

d. Speed of the movements of the head - this is the slowest part of the whole process.

e. Any buffers that are included "on disk" that allowfor cached reading and "write behind" writing.

BUT... In summary. Yes, the faster disk will generally be a better choice.

Hope this helps,
Cheers,
Tim.

by mdelyea

Hi! I'm sure you mean 5400 and 7200 rpm. Basically, several factors affect the rate of data xfer from the hard drive. In the case of rpms though it comes down to latency (the amount of time the head has to wait for a particular track and sector to come into position under the head). A hard drive spinning at 7200 rpm will move the data under the head quicker than one spinning at 5400 rpm. You should note, as Tim said, that other factors can affect the overall performance of the hard drive.

This discussion is closed to new replies.