Question

Locked

why does my usb mass storage device wont start because of error code 10

By 21k ·
AAA

This conversation is currently closed to new comments.

3 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Collapse -

Need more info

by Bizzo In reply to why does my usb mass stor ...
Collapse -

Try some of this.

by aSy In reply to Need more info

(1) First of all, plug the device into another PC, so you can confirm the problem is endeed on your PC.

(2) On Device Manager look for USB Controlers, if there's a device with the yellow exclamation mark next to is as USB Mass Storage Device. If it shows something like Error 10(like in your case), you should reinstall the drivers.

How to,.
Click on Start
Right Click on My Computer
Click on Properties
Click on the Hardware tab
Click the Device Manager button.
Expand Universal Serial Bus controllers
Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
Restart the computer, and allow the computer to reinstall the USB controllers.
Plug in the removable USB storage device, and then test to make sure that the issue is resolved.

(3) If you're using a USB cable, make sure it's the same speed as your device, like 1.0USB cable in 1.0USB device.

(4) Is it on? :)

Back to Storage Forum
3 total posts (Page 1 of 1)  

Related Discussions

Related Forums