Discussion Locked

Win 2k Pro freeze during Win Repaiing

0 helpful
3 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I have IBM Thinkpad using Win 2k Pro. It was running very slow. So I performed Chkdsk /P on the hard disk and it fixed several problem.

Then I had Win 2k Pro to repair, and in the middle of repairing it was configure the COMM+... devices it freeze. I reboot the laptop re-ran the repair again. Again it freezes at the exact same spot. I took out the hard drive and ghost it to another hard disk for backup. I cleaned out the orignial hard drive by delete partition and re-partition and reformatted hard drive. Then I installed Win 2k Pro. It went through installation with no problem. NOw I need to get the backup hard drive running so that I can transfer all important data and programs back to a cleaned hard drive.

How can I overcome the freeze part of the Win 2k Pro repairing? Keep in mind since it never complete repair it running in the loop of trying to repair Win 2k Pro. I cannot use Windows until the problem is fixed.

3 replies

by zar

the way i see it first buy a new hard drive then ghost the back up to it, and try to repair again, it seems to me the problem is not the software but the hardware.
I haver ran win 2K repair many times and the only times it froze it was because of hardware problems. beacuse oit is a laptop it will be kind of hard but you can try disabling al the comm devices in the bios and then runiong the repair.

by computer_excel

I have ghost the backup to a new hard disk, yet I was not able to repair on the new hard disk. Again I have re-installed Win 2k Pro on the original hard drive from stratch with no problem. It sounds like software problem not hardware.

This discussion is closed to new replies.