Discussion Locked
0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
We have three windows 2000 servers all running DNS and active directory and one is running Wins. They are all at location A. We have some remote users Location B that will connect to location A through an T1 point to point. Every one at both locations will access the internet through a T1 at location A and all are pointed to our DNS servers. WE have at both location Win 98 and 2000. THe Win 2000 machines connect just fine no matter if the are at location A or B. But at both locations the 98 machines are not able to connect. I can Ping my routers and Firewall from any of them but I cannot login or get to the internet. What could the problem be?
5 replies
by jwilczyn
Enable WINS resolution for 98 clients (IP address of WINS server) or change settings of your DHCP server (instruct DHCP to assign the WINS server) ? if DHCP is enabled.
by dennisbv
Poster rated this answer
by hberkhoff
Have you setup the lmhosts file on the Windows 98 clients? When a Windows 9x/NT4.0 client wants to log on to a remote domain you will need to change the lmhosts file and add at least the following information : #PRE and #DOM
See also the following link :
by dennisbv
Poster rated this answer
by dennisbv
This question was closed by the author
This discussion is closed to new replies.
Trending Windows Forum posts
Sort by Trending
1 helpful
16 replies
0 helpful
12 replies
0 helpful
3 replies
0 helpful
2 replies
Question
Is WSL still relevant in 2026?
0 helpful
1 reply