Discussion Locked

Windows 2000 Server

0 helpful
7 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

HI,
I'm installing the os (windows 2000 server) on a pent II 266 mhz computer w/256 mg memory. When ever I install any service pak and restart the computer I get the following message on the blue screen -- inaccessible_boot_device. I tried service pak 2,3
with the same results. I've tried repairing the windows installation w/the same results...The hard drive has no problems.. The computer runs fine until I install a service pak. Any help would be appreciated.

7 replies

by jeremy the it guy

This could happen if you install a service pack and it creates the new windows files on corrupt sectors of the hard drive. I'd suggest going to the hard drive's web page and searching for a utility that will repair bad sectors or even rewrite all data to zeros. I had this issue and Windows' repair utility will not repair bad sectors on the hard drive.

by bart.altena

This can happen if you try to install windows on a scsi HD.
If you use a scsi or raid controler then you will have to use the option [F6] at the beginning of setup.
Make sure you have a flop containing the drivers for de raid or scsi controler.

by deven

I had the same problem while installing Win2k on one of my machine. After searching I found the problem with Hard drive. It was having bad sectors on one of the partition, As well page file was allocated on that partition which was having bad sectors. I removed the page file and it worked fine.
Try removing page file

Deven

This discussion is closed to new replies.