General discussion

Locked

Windows 98se error codes

By sbaltus ·
I have a system running win98 se amd k6/2 at 450 128 mb of ram I get the following error codes(a fatal exception oe at 0167:bff9dfff,
explorer has caused a general protection fault in module user.exe at 0006:00001f22)also when on the internet netscape 4.73 keeps shutting down by itself. I have done a fresh install of windows I have changed out the ram. I can't seem to find anything on technet any help would be greatfull
Thanks SBaltus MCP,CNA

This conversation is currently closed to new comments.

9 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Comments

Collapse -

Windows 98se error codes

by Poettone In reply to Windows 98se error codes

this may help alittle,,

http://support.microsoft.com/support/kb/articles/Q256/8/50.ASP?LN=EN-US&SD=gn&FR=0&qry=amd&rnk=4&src=DHCS_MSPSS_gn_SRCH&SPR=W98SE

Collapse -

Windows 98se error codes

by sbaltus In reply to Windows 98se error codes

I could not get to the page you specified do you have an artical #
Thanks for your help

Collapse -

Windows 98se error codes

by mphoffar In reply to Windows 98se error codes

This actually sounds more like something with your Video Card. Maybe a newer driver or possibly setting the color depth to something like 256 Colors would cure this.

I've also seen some wierd things by having the 2X/4X acceleration set for cards that don't support this or having the Apeture size set to big or small in the bios *usually 64 is fine for most cards).

Good luck to you

Mark

Collapse -

Windows 98se error codes

by sbaltus In reply to Windows 98se error codes

Poster rated this answer

Collapse -

Windows 98se error codes

by Poettone In reply to Windows 98se error codes

Q256850 It also includes a file from Microsoft

Collapse -

Windows 98se error codes

by sbaltus In reply to Windows 98se error codes

Poster rated this answer

Collapse -

Windows 98se error codes

by kgosnell In reply to Windows 98se error codes

Try running the repair option for netscape , this happens for IE , it's likely an issue with the explorer. Also after getting a fault , run C:\WINDOWS\SYSTEM\SFC.EXE from the run option (this is the system file checker) and see if something caused a misplaced driver or damaged one

Collapse -

Windows 98se error codes

by sbaltus In reply to Windows 98se error codes

Thanks for the advice but I found out what it was it was a bad cpu I swapped it put and now it works fine

Collapse -

Windows 98se error codes

by sbaltus In reply to Windows 98se error codes

This question was closed by the author

Back to Windows Forum
9 total posts (Page 1 of 1)  

Related Discussions

Related Forums