5 replies
by 3108 Accepted solution
by robo_dev Accepted solution
is bios setting for 'plug and play OS' enabled?
more discussion here regarding intel SATA drivers:
http://www.tomshardware.com/forum/244142-32-sata-windows-installation-problem
by 3108 Accepted solution
have tried with plug and play os both enabled and disabled no difference .hard drive is not shown in bios as primary or secondary drive ,but does show on next page as maxtor drive .have also looked for achi setting in bios but cannot find it anywhere.
the system was working ok then suddenly would not boot
by tintoman Accepted solution
There is a setting in the CMOS which changes the priority of SATA and PATA drives, trouble is I cant remember if its in advanced cmos settings or integrated peripherals but when you find it I'm sure you can direct your system to look for a SATA drive to boot from.
Sorry to be so wooly
by 3108 Accepted solution
This discussion is closed to new replies.
Trending Hardware posts
Sort by Trending