Question Locked

Windows xp restarts when accessing dvd rw , cdrw, dvd rom ???

0 helpful
14 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

I recently installed a dvd burner dual layer on my pc. and I agonised about which drive to replace dvd player or cd-rw I decided the dvd would go...i don't remember why, but as I discovered when wanted to copy dvd to dvd i had to copy the dvd to my hard drive and then to the dvd burner. what a pain...so i decided to replace cd-rw with the dvd player, figured duh?? why duplicate drives...well to make a long story short...........when i try to access the burner the pc just restarts it self. i have check jumpers, bios, tried switching the master slave on them both nothing works. after some.....reading i am assuming this is a power issue???? let me just say there are three power conections for these drives 1. dvd burner 2. dvd player 3. floppy and on the primary i have two hard drives with two additional power plugins and one that would plug into a floppy. can these be switched around maybe main hd dvd player and floppy and on the other dvd burner and second hard drive???? any suggestions are greatly appreciated!!!!!!!!
no changes when i moved power conections around. so switched it back to dvd rw and cd rw and well i had forgoted that i was haveing some probs before i tried the change but i blu it off. so inresponce to what i am running xp home upgrade from me on a gateway 2000. intially i did not have this problem so i am really baffeled as it is now the way it was before i changed it. dvd rw is dl io the cd rw gateway osb and dvd rom is mashita or panisonic depending what info i read it is a 2mhz sys I am at a loss.........
I was originally able to use the dvd rw with the cd rw. it worked slow but worked. the only thing i have majorly changed is upgradeing my trend micro from 2006 to 2007 but why would that be an issue??????????
anyway, so as a last ditch effort i disconected the cd rw and only ran the dvd rw and the same thing restarted when i tried to start the dvd. oh I also ran spyware, virus protection ect... prior to this found some spyware but cleaned it up and still have the same problems?
now I have heard that INcd causes problems so I removed it but no change. I really feel at this point this is a windows xp thing but not sure. if I disconect both drives and uninstall drivers and then re boot will that make any changes????

14 replies

by computacentre

make sure the roms are on seperate ide channels.The irq's are probably getting confused and make sure you power supply is powerful enough to handel the load

by heather.smith

when i look under properties it says the master is 0 and the slave is 1. as far as the power goes, i did try to put on hard drive and the dvd rw on one line and dvd rom and the second hard drive and the floppy on the other but that did not change anything. plus I just about had to flip the hard drives upside down to get the cables to reach. I did notice something though when i start up the system goes into a auto defrag and disk chk. there are 32k in bad sectors?? I don't know when that happened but I wondered if the hard drive is in trouble??

by computacentre

the hdd drive upside-down is the problem there.You could have a bad ram module but my money is on the power supply

by shuja52

Never connect Hard Disk Drive and CD or DVD writer on single IDE cable, The hard disk will be in trouble, it definitely develop bad sector.

by computacentre

i bet you if you put your computer back to the way it was , it would work properly

by heather.smith

as I had stated in my inital post I have put it back to the way it was. but now when accessing those drives it causes the system to restart. like i said I really think it is some kind of windows issue

by heather.smith

I have in the past had an issue when Trend Micro update has come in so I posted a question and this is their responce. just got it today so I have not had a chance to try it. Will keep you posted.

A pleasant day to you!

NOTE: To keep our records up-to-date, it is very important to RESPOND to this e-mail.

Thank you for contacting Trend Micro Technical Support. I have carefully read your email and I understand that you can't access your cd/dvd/ drive.

If I misunderstood your concern, please feel free in replying to this email with more information. If I was able to determine the problem properly, kindly refer to the information I have provided below:

To resolve the issue:

1. Click Start > All Programs > Trend Micro PC-cillin Internet Security 2007 > Main Console.

2. Click Virus and Spyware controls > Protection against viruses on the left panel of the console.

3. Click Settings

Note: If the password is activated, a password prompt will appear.

4. On the file monitor tab click Select Files orFolders > Add Folder.

5. Select CD/DVD Drive on the list and then click OK.

6. Click OK twice.

7. Close PC-cillin Internet Security.

Please try the suggestions above at your earliest convenience and let me know the results in detail. If anything is unclear, do not hesitate to let us know and we?re glad to help.

VERY IMPORTANT: In order for us to have a history of our correspondence, please do not delete the subject and the contents of this email.

Thanks for choosing our product!

Best Regards,

Jobie Victoriano
Consumer Support Team
TrendLabs HQ, Trend Micro Incorporated

by gjo

I have picked up a similar problem when running two DVD units - XP restarts when I put in a DVD.
Have you been able to resolve your problem?

by heather.smith

I did get this to work...I did what Trend Micro sugested and remove both drives...(uninstalled) and then let windows find them again. I also updated the firmware for the dvd burner inaddition to updateing my burning software. I did remove all burner software and then reinstalled. As for why this happened, do not know, maybe a combination of many changes all at once? Hope this helped someone else. Thanks!

by george777

Bought a LG DVD-RW with Lightscribe. Installed everything, then suddenly started getting the reboot problem - sometimes when inserting a disk, sometimes during reading, sometimes during writing. Uninstaled all the burning software (Nero), also uninstalled inCD. No difference. Removed the drive, leaving only a SONY CDRW drive. Still no difference. NOW I get the reboot problem when I use the SONY drive as well!!! Totally redone the PC, FDISKed the HDD, reset the BIOS and guess what?? STILL NO DIFFERENCE!!! What is going on here???

by shuja52

Then
To resolve the issue:

1. Click Start > All Programs > Trend Micro PC-cillin Internet Security 2007 > Main Console.

2. Click Virus and Spyware controls > Protection against viruses on the left panel of the console.

3. Click Settings

Note: If the password is activated, a password prompt will appear.

4. On the file monitor tab click Select Files orFolders > Add Folder.

5. Select CD/DVD Drive on the list and then click OK.

6. Click OK twice.

7. Close PC-cillin Internet Security.

Please try the suggestions above at your earliest convenience and let me know the results in detail. If anything is unclear, do not hesitate to let us know and we?re glad to help.

VERY IMPORTANT: In order for us to have a history of our correspondence, please do not delete the subject and the contents of this email

by george777

No, I use Norton AV, in the Norton Internet Security package...
But I've now removed the LG DVD-RW drive, flashed my BIOS, fdisked my HDD and attempted to re-install Win XP... now I can't even use my SONY CDRW drive to install XP - the PC also reboots!!! How is this possible???

by kristinhope79

Ok, I know that this is several years later - but, just wondering if george777 figured out the problem. My parents are having the same problem and they have Nortan as well. Thanks for any response!

This discussion is closed to new replies.