Question

Locked

Wireless Networking

By deveshdhoom ·
Hi to all, i have a problem, actually i have 4 netgear wireless routers (wgt624v3) and 1 dsl modem for internet. i connect my dsl modem with RouterA through wire and in wan port of RouterA for internet acess, then i connect my second RotuerB with RouterA through wire and i use lan port of RouterA and wan port of RouterB similarly i use this concept for Router3 and Router4. In this case i am able to use Internet with any router but when it comes to internal lan then its having problem, it is like the system connected with RouterD can ping RouterC, RouterB, RouterA or directly to RouterB or RouterA, but the system connected to RouterA or RouterB or RouterC can not ping RouterD, neither system connected with RouterA can pind system Connected with routerB not systems connected with RouterB can ping RouterC, in short i can say if i ping from lower to uper like RouterD to RouterA everything goes fine, but when i ping from uper to down it doesn't work, but internet is working fine.
Specification of Routers

RouterA IP is 192.168.1.1
DHCP is enabled and its range is 192.168.1.2---192.168.1.254 and subnetmask used for this router is 255.255.255.0

RouterB IP is 192.168.2.1
DHCP is enabled and its range is 192.168.2.2---192.168.2.254 and subnetmask used for this router is 255.255.255.0

RouterC IP is 192.168.3.1
DHCP is enabled and its range is 192.168.3.2---192.168.3.254 and subnetmast used for this router is 255.255.255.0

RouterD IP is 192.168.4.1
DHCP is enabled and its range is 192.168.4.2---192.168.4.254 and sbunetmask used for this router is 255.255.255.0

I know i can use one router and 3 AccessPoint concept but i don't want to use that i want to use real router concept also i know the concept i am using is NAT and also i know the problem i am having will be solved if i use static route, but i don't what type of entry i will have to mention and on which router, like what will be destination ip adress what will gateway and metric value in static route.

So please help me its very urgent and tell me everything in detail. waiting for ur replies, and thanking all of u for reading my post

This conversation is currently closed to new comments.

2 total posts (Page 1 of 1)  
| Thread display: Collapse - | Expand +

All Answers

Share your knowledge
Back to Networks Forum
2 total posts (Page 1 of 1)  

Related Discussions

Related Forums