Discussion Locked

Workstation Imaging w/ Sysprep

0 helpful
5 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.

We are looking to image a computer running Windows 2000 w/ Sysprep, so each computer can be assigned a unique machine name, SID, and product license key. According to literature on Sysprep, the image has to be created by booting via floppy or CD (ifmachine is booted to Windows, the machine will run Sysprep program and assign SID which we do not want).

What is the best way to image the machine after booting from floppy or CD? We purchased PowerQuest Drive Image 2000, although I see no way to transfer image to network or local drive through boot up disk from the command prompt.

Thanks,
Dan

5 replies

by mike jones

You need to connect to the network first, before you run Drive Image.

Then the network drives become available to Drive Image for saving.

The way to do this is via a DOS Network Boot Disk.

I suggest searching microsoft's website for the information regarding creating a network boot disk as although simple to someone with experience, can be daunting and challenging the first time.

If you then get stuck, you can ask questions in these forums and we can point you in the right directionto creating the boot disk.

by switz

Your question is a little confuising so I hope my answer is what you are looking for. You state that you want sysprep to change the name, product license key, sid, etc. But then you state you don't want to change the sid. I can't understand why as that is one of the benifits of sysprep is to change the sid.

If you don't want to cahnge the sid and only the computer name then don't use sysprep. Simply make an image of the machine and, as long as the other machine's are similar in hardware makeup, transfer that image to that machine and boot up.

The easiest way to get the image to a server is to use Ghost Enterprise. It has a module called Multicast server built in that allows either to load an image from a client machine to a server or from the server to the client machine.

The nice thing about Ghost is it has another module with the program to make boot disks. You just choose what nic card you have and it makes the appropriate dos network boot disk.

It is very simple to do and works great. I hope this is what you were looking for.

This discussion is closed to new replies.