Discussion Locked

XP Client no internet thru SBS 4.5

0 helpful
10 replies
Closed to new repliesThis discussion is closed. It stays readable, but it takes no new replies.
Server is SBS 4.5 acting as a router one nic with public IP and other with private IP. Win98 workstations configured using the Client setup disk and they connect to the internet as long as you uncheck the proxy server box. Have added 2 Win 2k and one XP workstations. They log onto the server and can access server resouces but cannot get on the internet. Since there is not client setup for Win2k or XP and the Win98 don't use proxy server I am stumped. I know it must have something to do with theWindows proxy client that the setup disk creates but not sure how to config in Xp or Win2k.

10 replies

by sgt_shultz

you have setup the win2k and xp boxes without client setup disks? check the gateway settings in tcpip properties. make them the same as on the computers that can access the internet...?

by stanasteen

The server is acting as the router so it is the gateway. I have it set up as the gateway and that still doesn't help. The IP settings are the same as the 98 boxes.

by sgt_shultz

ok, questions:
is this xp pro?
is built-in firewall on in xp? look in help to see how to turn it off...

by curlergirl

I answered your question also in another newsgroup - but here it is again. Uninstall the proxy client from the Win2K and XP workstations. Even though you may have IE set not to use a proxy server, if the proxy client is installed and enabled, IE could be trying to use winsock and, not finding a proxy server, failing. If this doesn't fix your problem, respond again with further info on what behavior (error message?) you see on the Win2K and XP machines when they try to connect. Hope this helps!

by grbeckmeyer

I have manually installed the proxy client from SBS 4.5 on XP Pro PC's with no problem. You should have a 'MSPCLNT' on your SBS server, just run the setup program. If you are running XP Home, this may not work as it does not support a domain environment.

by stanasteen

There is only an .ini file. Think it is on the cd? I will check. Any idea's? This is going in the right direction, now!!

by stanasteen

Greg post to this question again so I can close the question and you can recieve the tech points! You got me pointed in the right direction. I used the setup computer wizard and only told it to install the Proxy client upon next login and that setup everything after I unchecked the proxy server in Internet Explorer. Thanks!

This discussion is closed to new replies.